8. Input
8.5.4 Shutdown retarding time
About the shutdown retarding time
The retarding time is the time between no signal is detected and the moment that the projector shuts down.
How to set the retarding time
1. Press Menu to activate the menus and select Input → No Signal. → Shutdown time (min).
Image 8-26
Main window
Image 8-27
Input, no signal
Image 8-28
2. Press ENTER to toggle between [1], [3], [5] and [10] minutes.
110
R5905032 HDX SERIES 01/06/2011
To Next Page
Loading...
Need help?
General
