13. Projector Control
13.5.2 Wired DHCP set up
How to set up
1. Press Menu to activate the menus and select P rojector Control → Network.
Image 13-15
Main menu, projector control
Image 13-16
Projector control, network
Image 13-17
Wired DHCP
2. Use the ▲ or ▼ key to select DHCP under Wired and press ENTER to toggle between [On] or [Off].
[On] : DHCP is activated. An automatic IP address is assigned.
[Off] : DHCP is deactivated. A fixed address must be used.
234
R5905032 HDX SERIES 01/06/2011
To Next Page
Loading...
