Barco HDX series - 12.1 Alignment menu overview

11. Lamp
11.6 CLO targets
What must be done?
The light output target can be set. This value will force the projector to produce the target lumens when the CLO mode is set to On.
How to set the target
1. Press Menu to activate the menus and select Lam p → Power → CLO mode.
Image 11-15
Main menu, lamp
Image 11-16
Lamp, power
Image 11-17
CLO Target lumens setup
2. Use the ◄ or ► key to change the CLO target lumens.
182
R5905032 HDX SERIES 01/06/2011