12. Alignment
12.14.6 White level adjustment (blending area)
How to set
1. Press Menu to activate the menus and select Alignment → Sc energix → White level.
Image 12-80
Main menu, alignment
Image 12-81
Alignment, Scenergix
Image 12-82
Scenergix, white level
2. Press ENTER to select the W hite level adjustments.
The White level position menu opens.
When Adjustment lines is [O n], the different areas are displayed on the screen.
Image 12-83
White level position
3. Use the ▲ or ▼ key to select one of the four size adjustments and press ENTER to select
Use the ◄ or ► key to change the border of the blending area to the desired position (value between 0 and 255)
R5905032 HDX SERIES 01/06/2011
217
To Next Page
Loading...
