E. Stacking HDX projectors
E.2 Stacking HDX projectors
CAUTION: Maximum stack three (3) projectors in a table mounted configuration.
Maximum stack two (2) projectors in a ceiling mounted configuration.
How to stack
1. Mount stacking points on lower projector. See "Mount stacking points", page 328.
2. Mount a bottom carry handle on the upper projector. See "Mounting the bottom carry handler", page 46.
3. Place the projector with carry handle on top of the projector with stacking points.
Make sue that all interlocking pins match with their corresponding interlocking sockets.
Image E-2
Dual stack
Tip: In case of stacking projectors for a ceiling mount configuration, first turn the projectors ups ide dow n be fore placing the
projectors on top of e ach other.
4. Attach the two projectors together by closing all four interlocking adapters.
A B
C D
Image E-3
Interlocking, close
R5905032 HDX SERIES 01/06/2011 329
To Next Page
Loading...
