12. Alignment
12.12 Internal patterns
What can be done with these patterns?
The projector is equipped with different internal patterns which can be used for measurement and alignment purposes.
How to select a pattern
1. Press Menu to activate the menus and select A lignment → Internal Patterns.
Image 12-60
Main menu, alignment
Image 12-61
Alignment, internal patterns
2. Press ENTER to select the pattern list.
Image 12-62
OSD test patterns
3. Use the ▲ or ▼ key to select a pattern and press ENTER to display that pattern.
The following patterns are available:
- Checker board
-ColorBars
- Convergence
- Convergence_2
- Ansi Lumen
-Focuswhite
- Focus black
- Focus green
- Full Screen Black
- Full Screen White
-CrossHatch
- Outline
- Scenergix
208
R5905032 HDX SERIES 01/06/2011
To Next Page
Loading...
