Barco HDX series - Removal of the Lamp House

16. Servicing
16.2 Removal of the lamp house
WARNING: Switch off the projector and unplug the power cord before starting the procedure.
Necessary tools
Flat screwdriver
How to remove
1. Remove the lamp cover on the input side, see "Removal of the lamp cover", page 304.
2. Release the 3 spring lock screws.
Image 16-3
Lamp house, captive screws
3. Take the lamp house by both handles and
pull it out.
R5905032 HDX SERIES 01/06/2011
297