12. Alignment
12.8.2 Warping status
About warp status
The status of warping determines how warping can be done.
Off No warping possible.
Manual Warping can be manually adjusted.
File
Warping is done by uploading a file which contains the warp settings.
How to set the warp status
1. Press Menu to activate the menus and select Alignment → Warping.
Image 12-24
Main menu, alignment
Image 12-25
Alignment, warping
Image 12-26
Warping, status
2. Press ENTER to toggle between [Off], [Manual] or [File].
R5905032 HDX SERIES 01/06/2011
195
To Next Page
Loading...
