Revision History AW00089317000
360 Basler ace GigE
AW00089315000 6 Jun 2012 Section 5
Replaced figures in Section 5.7 on page 63 by simplified versions.
Replaced figures in Section 5.8 on page 67 by simplified versions.
Added notes in Section 5.5 on page 61, Section 5.7.1 on page 63,
Section 5.8.1 on page 67:
that the recommended voltage range for camera power differs from
the voltage ranges for the input and output lines and
that the recommended voltage range for camera power for Basler ace
GigE cameras differ from the recommended voltage range for camera
power for other Basler cameras
Section 10
Added Section 10.6 on page 219 describing the stacked zone imaging
feature.
Integrated the color binning feature for the acA2500-14gc
(Section 10.9.2 on page 259).
Integrated section on binning’s effect on the stacked zone imaging
feature in Section 10.9.3 on page 261.
AW000893
16000 8 Aug 2012 General
Corrected the pixel data format for the acA2000-50 and acA2040-25
camera models throughout the manual (changed BG to GR).
Section 1
Integrated the new CMOSIS sensors CMV2000-2Exx and CMV4000-
2Exx for mono, color and mono NIR in the technical specifications
tables in Section 1.2 on page 2.
Added front view of CMOSIS cameras in mechanical drawings in
Section 1.4 on page 31.
Section 5
Inserted note that power to the camera must be supplied either via
Power over Ethernet (PoE) or via the camera’s 6-pin connector.
Corrected resistor symbol in Figure 39 on page 64.
Section 6
Corrected description of Section 6.2.4.3 on page 80.
Modified the Line Debouncer Time Abs parameter value to 20 µs in
Section 6.1.2 on page 72.
Section 7
Inserted information in Section 7.12 that the stacked zone imaging feature
increases the camera’s frame rate.
Section 9
Replaced the "For each pixel covered with a red/green/blue lens..."
expression by the "For each pixel covered with a red/green/blue
filter..."
throughout this section.
To be continued.
Doc. ID Number Date Changes
To Next Page
Loading...
Need help?
General
