The name plate Part A VC 6000
TM
Compact monitor
© VC 6000
TM
Compact monitor Juni 2014 C100575.002 Introduction Vers.10 - 6 -
4 The name plate
Some important information about your VIBROCONTROL 6000 Compact monitor
can be found on the name plate.
Company name
Product name
Instrument configuration
Power data
Material number
Serial number Date of manufacture
• Company name and CE mark
• Product name
• Instrument configuration and order code (different according to the
configuration)
• Power data (different according to the main power supply) and
information about the fuse protection used
• Material number:
An internal number of the delivered basic configuration
• Serial number
Instrument’s individual serial number depending on the material
number.
• Protection class identification
• In accordance with Electrical and electronics law (Elektro-G)
ADVICE
Please check that the information related to the type identification,
material number and serial number on the name plate corresponds
with the information on the signal-flow chart, configuration sheet and
parameter setting sheet. This guarantees that that the correct
documentation enclosures for the instrument are being used!
To Next Page
Loading...