BK Vibro VIBROCONTROL 6000 - Significance of the Logbook

System reliability Part A VC 6000
TM
Compact monitor
© VC 6000
TM
Compact monitor Juni 2014 C100575.002 Introduction Vers.10 - 21 -
8.3.6 Significance of the logbook
Various events are recorded in the logbook. These events are divided into
three groups.
1. System messages (incl. errors in the monitoring system)
2. System access (changes in parameters of the monitoring system)
3. Monitoring events
The Logbook is displayed in a block in the dialogue of VIBROCONTROL
6000 Compact monitor
and can be viewed with the User Terminal.
More information about the contents and use of the Logbook can be found in
chapter 2 of section D „Dialogue with the User Terminal“
8.3.7 Calibration
We recommend that the VIBROCONTROL 6000 Compact monitor be
calibrated every 5 years. This will ensure that the correct functionality of the
system is checked, and that the certification according to the quality
standard is maintained.
The last calibration date can be called to the dialogue with the User
Terminal.
This is found in the System block under System Info.
User Terminal button
USER MENU
NEXT
REFERENCE TIME
NEXT
SYSTEM
NEXT
LOGBOOK
ENTER BUTTON
SYSTEM
System Info
ENTER BUTTON
System Info
Equipment No.
NEXT (repeat until <Last Calibr.>
appears
System Info
Last Calibr.
ENTER BUTTON
Last Calibr.
03.03.2003
ESCAPE
SYSTEM
System Info.
The last calibration date can only be read with the User Terminal but cannot
be changed!
More detailed information about the handling with the User Terminal can be
found in section D „Dialogue with the User Terminal“

