BK Vibro VIBROCONTROL 6000 - Vector

Typical measurement tasks Part A VC 6000
TM
Compact monitor
© VC 6000
TM
Compact monitor Juni 2014 C100575.002 Introduction Vers.10 - 41 -
11.2.9 Vector
Input sensitivity For vibration acceleration sensors 100 mV/g
For vibration velocity sensors
(e.g. VS-068/VS-069) 100 mV/mm/s
For displacement sensors 8 mV/µm
Measurement type Vector of 1n, with magnitude and phase
Signal detection RMS
Bandwidth 22 %
Max. impulse interval 1 s
Measurement
accuracy
< 1 % of measured value plus 0,2 % of measurement range
full-scale value;
for phase information < 2°
(valid under steady-state conditions with a measurement time
> 100 ms)