Need help?Do you have a question about the BK Vibro VIBROCONTROL 6000 and is the answer not in the manual?
General| Dynamic Range | >100 dB |
|---|---|
| Signal Processing | Digital signal processing |
| Data Acquisition | Simultaneous sampling of all channels |
| Communication Interfaces | Ethernet |
| Power Supply | 24 V DC or 115/230 V AC |
| Measurement Channels | 4 |
| Inputs | IEPE |
| Alarm Outputs | Relay outputs, configurable |
| Enclosure Rating | IP20 |
Covers general safety advice, operational safety, warnings, and cautions for instrument use.
Explains the instrument's purpose, monitoring channels, and types of input signals.
Details information found on the instrument's name plate for identification.
Explains interpretation of signal-flow charts and use of configuration sheets for system setup.
Lists conformity to safety, EMC, temperature, and housing standards.
Details housing, electrical, and power supply specifications for the instrument.
Covers general installation safety, mounting, and site condition requirements.
Details wiring for various sensor types and peripheral equipment connections.
Explains system connections, commissioning, and function testing procedures.
Details works settings for common measurement tasks like vibration and bearing condition.
Describes the functions and components of the central BASE Module.
Explains functions, signal paths, and properties of various input and output modules.
Explains Sensor, Filter, and Trigger blocks for signal processing.
Covers BCU, DC, Speed, Vibration, Peak, RMS, Monitor, and Logic blocks.
Explains DC Output, Relay Block, and COM Block functionality.
Covers terminal function, connection, buttons, display, and menu structure.
Guides on displaying and editing parameters, measurements, limits, and outputs.
Details accessing the logbook, system events, and viewing system identification parameters.
To Next Page