VC-6000
TM
Compact monitor Part D Logbook
- 40 - C100585.002 Communication Vers. 03 © VC-6000
TM
Compact monitor Dec 09
11.6 Possible logbook entries
11.6.1 Logbook entries for access events
Logbook entry Cause Reponsible Block
Remote reset A reset via the X22 conector was
carried out.
None
Violat. reset The limit violation was
acknowledged.
MONITOR (ABS) ##
TO on <Trip override> Parameter was
switched on.
MONITOR (ABS) ##
TO off <Trip override> Parameter was
switched off.
MONITOR (ABS) ##
Monitor. on The monitoring function is active. USER MENU/OPC
Monitor. off The monitoring function is
inactive.
USER MENU/OPC
Global TO The global <Trip override> was
activated.
USER MENU/OPC
Acknowl. all All unacknowledged limit
violations and OK-faults were
acknowledged.
USER MENU/OPC
Reset all A reset was carried out for all
unacknowledged limit violations,
OK-faults and latching relays.
USER MENU/OPC
Login A SUPER USER has logged on. USER MENU
Logoff A SUPER USER has logged off. USER MENU
Setting edit Parameter settings were
changed.
USER MENU /OPC
Clock set The clock reference was
adjusted.
DATE / TIME
Relay reset A relay has been reset. RELAY ##
Rel. disabled A relay has been disabled. RELAY ##
Rel. enabled A relay has been enabled. RELAY ##
OK reset done The OK relay was reset. OK- RELAY
Download An application firmware download
was executed.
Alarms reset The limit violation (Alert and
Danger) was acknowledged.
DMONI.(ABS.) ##
TO on (2) <Trip override> parameter
switched on.
DMONI.(ABS.) ##
TO off (2) <Trip override> parameter
switched off.
DMONI.(ABS.) ##
To Next Page
Loading...