Mounting and Installation Part A VC 6000
TM
Compact monitor
© VC 6000
TM
Compact monitor Juni 2014 C100575.002 Introduction Vers.10 - 30 -
9.5.2.2 Relay output at RELAY-OUT(2-ch.)
CAUTION:
Because external voltages are connected to the relay contacts, there
may be dangerously high voltages at these contacts even after the
power to the VIBROCONTROL 6000 Compact monitor has been
switched off.
The maximum voltages and switching capacity of the relays must be
strictly observed (see section B: Relays technical data).
To Next Page
Loading...