Bosch FSA 050 - English

1 689 989 102 2019-05-24| Robert Bosch GmbH
| FSA 050 | 21 en
en – Contents
1. Symbols used 22
1.1 In the documentation 22
1.1.1 Warning notices - Structure and
meaning 22
1.1.2 Symbols in this documentation 22
1.2 On the product 22
2. User information 23
2.1 Important notes 23
2.2 Safety instructions 23
2.3 EC Declaration of Conformity 23
2.4 Electromagnetic compatibility (EMC) 23
2.5 Measuring category 23
2.6 RED (Radio Equipment Directive) 23
2.7 Wireless connections 23
2.8 Bluetooth 23
2.8.1 Bluetooth USB adapter 23
2.8.2 Troubleshooting 23
2.9 Information on CoRe 23
3. Important notes on operation of
the FSA 050 24
4. Product description 25
4.1 Usage 25
4.2 Prerequisites for operation
withCompacSoft[plus] 25
4.3 Scope of delivery 25
4.4 Description of device 25
4.4.1 Remote sensor 25
4.4.2 Rotary switch/buttons 26
4.4.3 Function keys 26
4.4.4 Connection panel 26
4.5 LCD 27
4.6 Battery charge indicator 27
4.7 Defective fuse symbol 27
4.8 Bluetooth USB adapter 27
5. Operation 28
5.1 SETUP menu 28
5.2 Preparation for measurement 29
5.2.1 Insertion of batteries 29
5.2.2 Checking measurement leads 29
5.3 Safety information 29
5.4 Measuring voltages and frequencies
(High voltage analysis) 29
5.5 Insulation analysis 30
5.5.1 Standard insulation analysis 30
5.5.2 Insulation analysis – limited-time
modes t, PIor DAR 31
5.6 Continuity measurement (Ω) 32
5.7 Resistance measurement (kΩ) 32
5.8 Capacitance measurement (µF) 32
5.9 Storage of measurement results 32
5.10 Display of stored measurement results 32
5.11 Deletion of stored measurement results 32
5.11.1 Deletion of individual measurement
result 32
5.11.2 Deletion of all stored measurement
results 33
5.12 Downloading of stored measurement results 33
5.13 CompacSoft[plus] software installation 33
5.14 FSA 050 Settings 33
6. Maintenance 34
6.1 Battery replacement 34
6.2 Fuse replacement 34
6.3 Cleaning 34
6.4 Replacement and wearing parts 34
7. Decommissioning 35
7.1 Change of location 35
7.2 Disposal and scrapping 35
8. Technical data 35
9. Intrinsic error and operating error 37