Bosch Solution 6000-IP Installation Guide

1-1
Bosch Security Systems 10/22 BLCC615I

SECTION 1
Overview
FEATURES
Listed below are the main features of the Solution 6000-IP
Control Panel.
♦ Individual Box Tamper Circuit Monitoring
♦ Report Via Email (Internet)
♦ Daylight Savings
♦ Senior Watch
♦ System Maintenance Interval Reminder
♦ System Weekly Test Reminder
♦ Area Inactivity Interval
♦ Temporary PIN
♦ Dual Reporting
♦ Dual Redundant Reporting
♦ Alarm Report Abort/Cancel Options
♦ 8 Programmable Holiday Calendars
♦ 16 Programmable Door Assignments
♦ 8 On-board Zones (Exp To 144 Zones)
♦ Fire Alarm Verification
♦ 990 PIN Users
♦ 4 Supervised High Power Digital Outputs
♦ 1 Relay 2 Amp Form (C) Contact (Expandable to 32)
♦ Supervised Siren Driver
♦ Partitionable To 8 Areas
♦ Supervised LAN Keypads (Maximum 16 Keypads)
♦ Keyswitch Input
♦ 2000 Event History Log Memory
♦ EMI / Lightning Transient Protection
♦ Fully Menu Text Programmable
♦ Programmable Via Solution Link Software (Remote/Direct)
♦ Time Executed Functions
♦ 60+ Output Event Types
♦ Exit Restart
♦ Expansion Module Supervision
♦ Remote Arming
♦ IP Reporting Via CSV-IP, Conettix, SIA, MyAlarm
OVERVIEW
Zones
The Solution 6000-IP control panel provides up to 144
separate zones of protection. Zone programming
determines the panel’s response to open/short and
tamper conditions on the zone loop.
Areas
The control panel supports up to 8 separate areas. You
can assign all zones to a single area, or you can assign
each zone to a combination of different areas.
You can arm and disarm the control panel by area,
alternatively, you can arm and disarm several areas at the
same time.
Keypads
You can connect a maximum of 16 fully supervised
keypads to the control panel. The available current affects
the total number of keypads that you can connect without
the need to provide additional power supplies.
History Log
The control panel can store up to 2000 history events from
all 8 areas. All events are stored in the log, even if they are
programmed not to report via the on-board dialler.
You can view the control panel’s history log via keypad,
serial printer (optional), or by connection of a personal
computer (direct/remote) using the Solution Link upload/
download software.
Programming
You can program the control panel either by a keypad
or using a personal computer using the Solution Link
upload/download software.

Bosch Solution 6000-IP Specifications

General

Event Log	Yes
Areas	1
Partitions	1
Outputs	2
Communication	IP, GSM
Mobile App	Yes
Automation	Yes
System Type	Hybrid
Battery Backup	Yes
Keypads	Up to 8