Solution 6000-IP
Installation Manual Programming Examples
12-3
Bosch Security Systems 10/22 BLCC615I
Door Auto Lock/Unlock By TimeZone
The control panel is capable of automatically unlocking
and locking single door or multiple doors using a single
timezone.
Programming the TimeZone Auto Unlock/Lock Times
1) Select a timezone that is not used and program the
timezone name (description) in MENU 7-5-0.
2) Set the timezone start time (Door Auto Unlock
Time) and stop time (Door Auto Lock Time) in
MENU 7-5-1.
3) Set the days of the week that the timezone will
operate (including holidays if required) in MENU
7-5-2.
Programming Output For Door Operation
4) Select an output that is not used and program the
output name in MENU 4-1-0.
5) In MENU 4-1-1, set the output event type as 60 -
Door.
6) In MENU 4-1-2, set the output event assignment to
the door number that you wish to control (eg. 01 -
Door 1 Name).
7) In MENU 4-1-3, set the output polarity for the door
operation (eg. 04 - Open, One Shot Low).
8) In MENU 4-1-4, set the time that you want the door
to unlock when a user presents their credentials
(eg. 000 000 005 000 = 5 seconds).
Setting the Door Options
9) Select the door that will follow the timezone and
program the door name (description) in MENU 4-2-
0.
10) Set the timezone that the door that will follow for
auto lock/unlock in MENU 4-2-2. Multiple doors
can be programmed to follow the same timezone if
required.
11) Set the door options as required in MENU 4-2-3
(default = Hold Off Unlock If Area Armed).
Setting Console Door Assignment
12) Program the console (keypad/reader) door
assignment in MENU 6-1-7.
13) Program other console (keypad/reader) options as
required including Home Area, Area Options and
General Options.
Setting User Door Assignment
14) In MENU 1-4-5. assign each user to the door being
used as required. Each user can be assigned to
multiple doors.
15) Program the users PIN, token, fingerprint as
required.
»»END OF SECTION««
To Next Page
Loading...
Need help?
General
