Bosch Solution 6000-IP Installation Guide

Solution 6000-IP  Installation Manual  System Programming
11-11
Bosch Security Systems 10/22 BLCC615I
TIMEZONES
The control panel has 2 fixed timezones (Tz0 - Disabled and
Tz1 - 24 Hr TimeZone) and 15 programmable timezones.
A timezone is created by setting up a valid time period
that becomes TRUE whenever the time is equal to or after
the start time and before the end time for the selected
day.
There are 2 default timezones created within the system
that cannot be changed. These are Tz0 = Disabled - which
is FALSE 24/7 and Tz1 = 24 Hour which is TRUE 24/7 (TZ1
being the opposite of Tz0). Tz2 to 16 are configurable to
reflect any operation time and day as required to operate,
restrict, or control when something happens. Please
refer to the following table that illustrates the effect of
assigning timezones.
Assigned To Tz0 (Disabled) Resulting Effect
Door No access
Door Lock Will never unlock
Door Group No access
Egress Will never trigger
Auto Arming Will never arm (Same as Tz1)
Output Will never trigger
Assigned To Tz1 (24 Hr) Resulting Effect
Door Full 24 hr access
Door Lock Unlocked 24 hrs
Door Group Full 24 hr access
Egress Operates 24 hrs
Auto Arming Will never arm (Same as Tz0)
Output Always triggered
Table 33: Fixed Timezones (Tz0 & Tz1)
System > TimeZones >
Name

-

MENU 7-5-0
T i m e Z o n e 2 N a m e
This menu allows you to program a descriptive text name
for each timezone in the system. Each timezone name has
up to 20 characters. The timezone name will be referred
to in other timezone related programming functions.
1) Press [MENU] + [7] + [5] + [0] and use the up and
down arrows to highlight the timezone in the list
then press [OK]. Alternatively, you can enter the
timezone number directly and press [OK].
Tz2 TimeZone 2 Name
Tz3 TimeZone 3 Name
Tz4 TimeZone 4 Name
Press  OK or MENU
2) User the arrow and number keys to move and
change text. When the timezone name is complete,
press [OK]. At any time you can press the [OFF] key
to clear the text from the current cursor position to
the end of the line.
Name Tz3
TimeZone 3 Name
Press  OK to SAVE
i
Note
See Alpha Text Programming in Section 4 -
Programming Overview for further detail on entering
alpha text.
System > TimeZones >
Time

-

MENU 7-5-1
Start Time Stop Time
Period 1
-- : -- : -- -- : -- : --
HH MM SS HH MM SS
Start Time Stop Time
Period 2
-- : -- : -- -- : -- : --
HH MM SS HH MM SS
Start Time Stop Time
Period 3
-- : -- : -- -- : -- : --
HH MM SS HH MM SS
Start Time Stop Time
Period 4
-- : -- : -- -- : -- : --
HH MM SS HH MM SS
This menu allows you to program the start time and stop
time of each timezone period. Each timezone can have up
to 4 different periods.

Bosch Solution 6000-IP Specifications

General

Event Log	Yes
Areas	1
Partitions	1
Outputs	2
Communication	IP, GSM
Mobile App	Yes
Automation	Yes
System Type	Hybrid
Battery Backup	Yes
Keypads	Up to 8