Solution 6000-IP
Installation Manual System Programming
11-17
Bosch Security Systems 10/22 BLCC615I
System > System Options >
Language
MENU 7-7-5
0 - English
0
1 - Alternate Language
This menu allows you to select the language that will be
displayed on the keypad. You have a choice between
English (default) or a second language (determined by the
country that the control panel is shipped to).
1) Enter [MENU] + [7] + [7] + [5]. The keypad will
display the following:
Language
0
Press 0-9 OK to SAVE
2) Using the numeric keys, enter the language option
as required then press [OK] to save and exit or press
[MENU] to exit without saving.
System > System Options >
Site Name
-
MENU 7-7-7
1 Characters 32
M y A l a r m
This menu allows the installer or master user to program
the emails subject line to identify the alarm system (eg.
site name) to the receiving party. A maximum of 32
characters of text can be entered in this field. Use the []
and [] keys to scroll the cursor left and right to view the
entire name.
1) Press [MENU] + [7] + [7] + [7].
The keypad will display the current Site Name.
Site Name
MyAlarm
Press OK to SAVE
2) Using the numeric keys, enter the description of the
control panels site name. You can change a single
chanracter by scrolling the cursor left [] and right
[].
At any time you can use the [] and [] keys to scroll
through the complete list of available characters.
To clear all text from the cursor position to the right,
press the [OFF] key.
3) When the site name is complete, press [OK] to save
and exit, or press [MENU] to exit without saving.
System > System Options >
Custom Text Line 1
MENU 7-7-8
This menu allows the installer to replace the default banner
located at the top of the keypad screen with two lines of
custom text (maximum of 20 characters. Text entered
here will display on the first line. See example below.
1) Press [MENU] + [7] + [7] + [8]. The keypad will
display the following:
Custom Text Line 1
Press OK to SAVE
2) User the arrow and number keys to move and
change text. When the custom text is complete,
press [OK]. At any time you can press the [OFF] key
to clear the text from the current cursor position to
the end of the line.
System > System Options >
Custom Text Line 2
MENU 7-7-9
This menu allows the installer to replace the default banner
located at the top of the keypad screen, Text entered here
will appear on the second line.
1) Press [MENU] + [7] + [7] + [9]. The keypad will
display the following:
Custom Text Line 2
Press OK to SAVE
2) User the arrow and number keys to move and
change text. When the custom text is complete,
press [OK]. At any time you can press the [OFF] key
to clear the text from the current cursor position to
the end of the line.
Custom Text Line 1
Custom Text Line 2
To Next Page
Loading...
Need help?
General
