Brady M710 - Label Types & Label Supply

M710 User Manual 96
Troubleshooting
Label Types & Label Supply
Label Types & Label Supply
Some label types require specific label supplies. Additionally, some label supplies require specific
ribbons. If the label supply installed in the printer is incompatible with the installed ribbon, an error can
occur. Check your local Brady website for ribbon and label supply compatibility.
Label Type Label Supply Size
General Continuous and pre-sized
Wire Marker Continuous, self-laminating, and
pre-sized
Flags Continuous and pre-sized flag
labels
Terminal Block, Patch Panel, 66-Block Continuous only
Face Plate Continuous only
110-Block, Bix Block Continuous only 0.625" (15.9mm) or 0.475
(12.1mm) widths
Vial Continuous only (not self-
laminating or PermaSleeve)
DesiStrip Continuous only
Breaker Box Continuous only
Safety Templates (North America) Continuous, preprinted pre-
sized, and pre-sized
Pre-sized labels must have a 2:1
width to height ratio.
General Templates (Europe) Continuous and pre-sized
Standard Pipemarker Continuous only
Arrow Tape Continuous only
Rollform Pipemarker Continuous only