M710 User Manual 2
Introduction
System Specifications
Physical and Environmental Characteristics
The M710 printer has the following physical and environmental characteristics:
Note: The table below refers to the M710 printer only. Consumable performance may vary.
Proximity Range for Bluetooth
The M710 printer should be within 50 ft (15.2 m) of the device to pick up the Bluetooth signal.
Physical U.S. Units Metric Units
Dimensions 13.6” L x 9.5” W x 4.6” H 345 x 240 x 117 mm
Weight (with Li-ion battery pack) 5.8 lbs 2.6 kg
Environmental Operation Storage
Temperature (Printer)
Exposing the printer to direct
sunlight is not recommended.
40° to 120° F (4° to 49° C)
The AC adapter is rated at a
maximum temperature of
104° F (40° C).
14° to 140° F (-10° to 60° C)
Relative Humidity (Printer) 10% to 90% (non-
condensing)
10% to 90% (non-
condensing)
Temperature (AC adapter) 32° to 104° F (0° to 40° C) -40° to 158° F (-40° to 70° C)
Relative Humidity (AC adapter) 5% to 95% (non-
condensing)
0% to 95% (non-condensing)
CAUTION! Avoid using the printer near water, in direct sunlight, or near a
heating device.
To Next Page
Loading...
