M710 User Manual 41
Editing Labels on the Printer
Formatting Text
To change the size of the chosen font:
1. Position the cursor on the line of text that you want to resize. See “Positioning the Cursor” on
page 39.
2. Press FONT.
A pop-up menu displays the available font sizes for the label supply installed.
3. Navigate through the Size menu to select the desired font size.
•
Custom:
To manually enter a size, select
Custom
. The minimum/maximum range is shown
below the type-in field. If you exceed these values an error will display. Press
ENTER
after
selecting or inputting the size.
•
Auto:
To have text automatically size as you type, select
Auto
. Autosize starts with the largest
font size that fits on the label. When a line of text reaches the edge of a label it scales downward
until you press
ENTER
or the minimum font size is reached. When working with autosize and
multiple lines of text, all lines on a label maintain the same size. Autosize is the default setting
for all labels and is displayed as an ‘A’ in the upper left corner of the touchscreen.
Font Attributes
Font attributes (bold, italic, underline, expanded, or condensed) can be applied to an entire line of text
or to individual characters within a line of text. The attributes can be turned on before entering the text
or after the text has already been entered.
New Text
To turn an attribute on before entering the text:
1. Position the cursor where the attribute should take affect.
2. Press FONT.
3. Tap the desired attribute, then tap On (for bold, italics, and underline). For expanded select a
percentage lower than 100; for condensed select a percentage higher than 100.
4. Enter the text to be affected by the attribute.
5. If you want to continue typing without the attribute, press FONT again and turn the attribute off.
For expanded or condensed text, change the percentage to 100% to return to normal.
When applying the attribute to text as it is being typed, the attribute stays on until it is turned off or until
you move to a new area or label.
Standard
Expanded
Condensed
To Next Page
Loading...
