M710 User Manual 5
Setup
Power
AC Power Adapter
The printer can be powered through an AC power adapter (included). When the adapter is plugged in,
it is also charging the battery.
To plug in the printer:
1. Plug the power cable into the adapter.
2. Insert the round end of the adapter cable into the power port on the right side of the printer.
3. Plug the other end of the cord into an electrical outlet.
Battery
CAUTION! Use only the 18 V DC, 5A, Brady AC adapter for supplying power to
the printer.
WARNING! Risk of explosion if battery is replaced by incorrect type. Dispose
of used batteries according to instructions.
To Next Page
Loading...
