Brady M710 - History

M710 User Manual 37
General Operation
Printing
• Separator: To separate different labels on continuous label supply, add a separator by
selecting it from the drop down list. Tap the Separator list an then tap None, Line, or Tic.
3. Tap OK. The labels begin printing.
History
History is a convenient feature that enables easy access to recently used files. When Print History is
turned on it keeps track of the last 10 label files created and printed from the editor. Labels imported
from an external source will not appear in the history. For information on setting up this option, see
“Print History” on page 10.
Note: History is only available for labels created on the printer, not for labels printed from Brady
Workstation software or the Brady Express Labels mobile app.
To use the history:
1. Press FN + HISTORY.
A list of previously printed files displays at the bottom of the print screen. You can reprint any
of these files.
2. Tap the file you want to print.
3. Press PRINT.
If the file you want to reprint is incompatible with the currently installed label supply, a message
displays indicating such.
4. To correct, install the label supply indicated in the error message.
5. Clear the message, then press PRINT.
Line Separator Tic Separator