M710 User Manual 15
Setup
Connecting the Printer
USB
To connect to a computer via USB 2.0, plug the
provided USB cable into the printer and the
computer. Brady Workstation software
automatically detects the printer when connected
via USB cable.
Note: If you are not using Brady Workstation
software, you need to install the printer
driver. See the Driver Installation
Guide PDF file on the USB drive that
came with the printer.
Wi-Fi
This capability is only available on the wireless printer model.
Connect to a Wi-Fi network either by searching for and selecting a network, or by manually entering
the network settings. Once connected, the printer can communicate with devices on that network.
Search to Connect
This is the easiest and most common method for connecting.
To connect to a Wi-Fi wireless network:
1. Make sure the printer is turned on.
2. Press FN + Setup. (The Setup key is in the row of function keys. See “Printer Components” on
page 4.)
3. On the touchscreen, tap Wi-Fi.
4. Tap On to turn on Wi-Fi. The printer searches for Wi-Fi networks and displays a list of
networks found. Touch and drag to scroll the list. (If you need to identify the network by static
IP address or DHCP, see “Manually Enter Settings” on page 16.)
5. Tap the network that you want to use and then tap Join.
• If the network is a personal network, enter the password on the
Join Network
screen and then
tap
Next
. The printer returns to the
Wi-Fi
screen which shows the current network.
• If the network is an enterprise network, choose the type of authentication and then tap
Next
.
The printer then asks either for the username and password or for information on the
certificate, depending on the authentication method. You may need information from your
IT department to complete the settings.
Enter the information and tap Next. The printer returns to the Wi-Fi screen which shows
the current network.
• If the network you need is not in the list, it may not be discoverable. Tap
Other
. The system
displays settings appropriate to your selection. You may need information from your IT
department to complete the settings.
6. Tap OK.
To Next Page
Loading...
