Brady M710 - Page 78

M710 User Manual 69
Label Types
110-Block, Bix Block
The following example displays the areas based on the Block Type selected (2-pair, 3-pair,
4-pair, 5-pair, or Blank). The blank strip is formatted as two areas covering the full printable
length of the strip.
4. In the Sequence Type field, from the drop down list, select if and how you want to add
sequential data to the label.
• If None is selected, the areas are blank and you can independently enter data in each area of
the strip.
•
Horizontal increments one number per area, based on the start value.
2 Pair
3 Pair
4 Pair
5 Pair
Blank
Text entered in area 1 prints here.
Text entered in area 2 prints here.