Brother E850TKW - Page 44

Printing a Tube or Label Using the P-touch Keyboard
34
2
Time Stamp Setting 2
You can insert a time stamp in your tube or label using the following procedure.
Press the Insert key, select [Time Stamp] using the or key, and then press the OK or Enter key.
You can change the time stamp settings to display the time stamp in various formats. (Factory settings are
shown in bold.)
 Timing
You can select whether to print the date and time when you press the Insert key, select [Time Stamp]
using the or key, and then press the OK or Enter key, or the date and time when you press the Print,
OK or Enter key to add to your tube or label.
a Select [Settings] in the Home screen using the , , or key, and then press the OK or Enter
key.
b Select [Time Stamp Setting] using the or key, and then press the OK or Enter key.
c Select [Timing] using the or key, select [Auto] or [Fixed] using the or key, and then
press the OK or Enter key to apply the settings.
Note
When [Auto] is selected for the [Timing] setting and a clock icon is added to the text by pressing the
Insert key, selecting [Time Stamp] using the or key, and then pressing the OK or Enter key, you
can confirm the icon settings as follows. Position the cursor to the left of the clock icon, press the Insert
key, select [Time Stamp] using the or key, and then press the OK or Enter key.
Attribute Setting Description
Timing Auto
Press the Insert key, select [Time Stamp] using the or key,
and then press the OK or Enter key; the current date and time (a
future date and time or a past date and time when [Forward] is
set) and a clock icon will be inserted where the cursor is
positioned on the tube creation screen or the label creation
screen.
When you press the Print, OK or Enter key to print, the current
date and time will be printed on the tube or label where the date,
time, and the clock icon are positioned on the tube or label layout.
Fixed
Press the Insert key, select [Time Stamp] using the or key,
and then press the OK or Enter key; the current date and time will
be inserted where the cursor is positioned on the tube creation
screen or the label creation screen.When you press the Print, OK
or Enter key to print, the date and time will be printed as shown
on the tube creation screen or the label creation screen.