Brother MFC-L2700D Service Manual

2-55
Confidential
 Error code BF00
The first side document scanning position sensor detected that the ADF was unable to
duplex-feed the document because the document length is 400 mm or longer.
 Error code C700
There is insufficient memory to expand PC print data.
Error code C800
The memory size allotted for Secure print was exceeded when saving Secure print data.
 Error code D100
An error occurred while initializing the modem.
Scan Unable
Document is too long for 2-sided scanning. Press Stop key.
<User Check>
• Set A4 or Letter size paper.
• Remove the jammed document.
Step Cause Remedy
1
First side document scanning
position actuator caught in some
sections of the machine
Reattach the first side document scanning
position actuator.
2
First side document scanning
position sensor failure
Replace the first side document scanning
position sensor PCB ASSY.
3
Main PCB failure Replace the main PCB ASSY.
Out of Memory
Press Stop Key.
Print Data Full
Print Data is full. Press Stop and delete the previously stored data.
<User Check>
• Print the print data stored in the memory.
• Divide the print data and print them separately.
Step Cause Remedy
1
Main PCB failure Replace the main PCB ASSY.
Print Unable D1
Turn the power off and then back on again.
Step Cause Remedy
1
Modem PCB failure Replace the modem PCB ASSY.
2
Main PCB failure Replace the main PCB ASSY.

Brother MFC-L2700D Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Duplex Printing	Yes
Paper Input Capacity	250 sheets
Monthly Duty Cycle	Up to 10, 000 pages
Functions	Print, Copy, Scan, Fax
ADF Capacity	35 sheets
Memory	32 MB
Fax Speed	33.6 Kbps
Print Speed	Up to 27 ppm
Connectivity	USB 2.0
Scanner Type	Flatbed
Copy Speed	Up to 27 cpm
Scan Resolution	Up to 600 x 2400 dpi
Display	2-line LCD