Bruker HYPERION - Page 87

85
Bruker Optik GmbH HYPERION User Manual
Operation 4
18. Return to the sample area you have
chosen in step 9 for spectroscopic anal-
ysis.
In case of the manual stage, move the
stage in x- and/or y-direction until you
have found the sample area in question
again.
In case of a motorized stage, return
the stage to the x/y-position, you have
saved in step 13.1.
Manual x/y-stage: Rotary knobs (A and
B in fig. 3.6)
Motorized x/y-stage: Joystick and cor-
responding stage control functions in
OPUS
☞ See OPUS/VIDEO Manual.
19. Focus on the sample. Manual stage and motorized x/y-
stage: coarse and fine focus knobs at
the microscope (B/B’ and C/C’ in fig. 3.7)
Motorized x/y/z-stage: Joystick and
corresponding stage control functions in
OPUS
☞ See OPUS/VIDEO Manual.
21. Activate measuring mode. either using the IR button on the operat-
ing panel of the microscope (C in
fig. 3.4) or in the OPUS video wizard
☞ See OPUS/VIDEO Manual.
20. Start the sample measurement. corresponding OPUS function
☞ See OPUS/VIDEO Manual.
➣ Afterwards, OPUS calculates automatically the result spectrum of the sample and displays
the sample spectrum in the OPUS spectrum window.
Operating step Corresponding operating element(s)