User Manual 5 Step-by-Step Guides
110
Represents how similar (high sensitivity) or
diff
erent (low sensitivity) the chemical
compositions of the distinguished phases
area.
Represents the minimum size of a phase,
ranging from 0 to 1 area % of the map image.
Represents the sensitivity used to connect
small phases.
Phase results will appear in the Phase
result list
Choose area %, area pixels and area µm/mm.
You can rename P1, P2, … by selecting a
phase from the list and clicking on its name.
Rename and press <ENTER>.
Select or deselect the phases in the
thumbnail ba
Click on a phase thumbnail to highlight it
and
Merge phases using the icon
Several phases can be merged into a single
phase by highlighting the particular phases in
the clipboard
(press CTRL or SHIFT key to
highlight multiple thumbnails
b) Extract a spectrum of a highlighted
phase using the icon.
The spectrum will be displayed in the
Spectrum
Use the workspace icon to
Save datacube (Hypermap) as .bcf file or map
data as .rtm file.
Alternatively, drag and drop data to
Use the Phases tab icon to
Alternatively, right click into composite image
and use the Phases menu.
b) Add Phase data to project
c) Add Phase data to report.
Use the thumbnail bar icon to
Individual phase images of selected
thumbnails will be saved.
b) Add Phase images to project
Composite and individual phase images will
be added to Project.
c) Add Phase images to report.
Individual phase images will be added to
Report.