User Manual 4 The ESPRIT 2 Software
26
4.2-1 QUANTAX communication server
Fig. 4.2-2 QUANTAX user list
Fig. 4.2-3 Assigning a new user
The QUANTAX communication server
controls the
user assignments as well as the internal and external
server communication. Service tools and
information for troubleshooting are also
provided.
The communication server runs on the QUANTAX
server computer. It is also present in single computer
and standalone systems.
Clicking the Bruker icon in the Windows
®
system
tray of the server computer opens the console of the
on server. With exception of the actions
described below no changes to the communication
server settings must be made. Unauthorized altering
of settings can render the system useless and lead
to severe data loss.
New users
are to be assigned from the QUANTAX
communication server. Double clicking the Bruker
console of the communication server.
The tab QUANTAX user
lists the current assigned
ser can be added after clicking the
button. A password can be entered (leaving
the field empty is permitted) and an optional user
description can be added. As user type User, Main
user, and Supervisor can be selected.
User has limited access to the ESPRIT System
. This user level only allows access to the
tab and can review the connected
instruments and license.
The Main user
has limited access to the ESPRIT
This user level has full access to
the tabs System, Appearance
and can calibrate the
connected EDS detectors as well as the imaging
has no access to the service
settings of the WDS detector and the
microscope driver.
The Supervisor has full access to all tabs in
Each new user is automatically assigned a folder
structure in a private volume of the server. Default
methods, a predefined user profile, and demo data
are copied to the user folders.
To Next Page
Loading...
Need help?
General
