Bruker QUANTAX EDS User Manual

User Manual 3 The QUANTAX EDS System
18
3.2 ESPRIT 2
Software
System requirements.
QUANTAX requires
Windows
®
7
with a service pack level specified at
time of installation. Operating system updates are to
be approved by Bruker Nano. Only
computers
provided or approved by Bruker Nano may be used.
Windows
®
administrator rights are required for the
installation of QUANTAX.
Ask your system
administrator for help.
Hardware driver. During the
first startup of the
server PC the driver for the IO-Scan plug-in must
be
installed. The driver is available from the ESPRIT
installation CD, which should always be at hand.

Do not save the license with a
pdf-reader. This procedure destroys
the license.
License file.
A user and system specific license file
is contained on a separate CD. During the ini
tial start
of ESPRIT the user is prompted to provide this CD
for registration.
The license file (Licence.pdf) is stored to the server
computer; after completion the license CD should be
kept in a safe location.
Software options.
Licenses control general access
to the ESPRIT software as well as installed
options.
Selected options or the complete license can be
time-
limited. Updated license files obtained from
Bruker Nano can be read in the System
workspace
(see section 4.7)
. Changes will be enabled after
restarting ESPRIT.
The
license is also provided as hard copy. The
contents can be checked against the file, which can
be opened by any pdf-reader or from the System
/
System workspace by clicking the button.
Hardware key. The system license is bound to a
system specific hardware key coded into the
QUANTAX server hardware. Client workstations can
receive certification from a licensed server via the
network. Standalone PCs (data stations) must be
equipped with an optional USB
dongle replacing the
hardware coded key.

Bruker QUANTAX EDS Specifications

General

Brand	Bruker
Model	QUANTAX EDS
Category	Laboratory Equipment
Language	English