Bruker QUANTAX EDS User Manual

User Manual 5 Step-by-Step Guides
74
7
Add reference concentrations and click
.
8
Close quantification dialog with .
Repeat step 4 to 8 until all standard
samples are processed.
Edit existing standard values
See Fig. 5.11-1.
9
Click the
icon in the bottom left
corner of the
Standards configurator
to
open the
ADMINISTRATION OF
STANDARD LIBRARY dialog.
10
Click on an element to select it.
11
Select the standard spectrum assigned
to the selected element.
The assigned spectrum appears in spectrum
chart.
12
Click
to change standard
concentrations.
The EDIT STANDARD dialog pops up, where
the assigned concentrations can be
changed.
1
3
Click
to re-quantify the
standard
spectrum.
The QUANTIFICATION dialog pops up,
where the re
-quantification of standard
spectrum can be performed. Follow
section
5.12.1.
Fig. 5.11-1 Creating and maintaining standards library

Bruker QUANTAX EDS Specifications

General

Brand	Bruker
Model	QUANTAX EDS
Category	Laboratory Equipment
Language	English