Bruker QUANTAX EDS - Page 87

5.12 Quantitative EDS Analysis of Bulk Samples QUANTAX EDS
87
15
Click
on the
button and
select
Load…
Load a standard-based quantification method
e.g.
Linemarker Standards.mtdx.
Alternat
ively, open the Method editor and
select
Use standards under
Quantification
model.
16
Click
.
…unless automatic quantification during or
after acquisition is enabled.
1
7
Use the
button of the result table to
Copy
, Save or Add to project or Add to
report.
Save the modified quantification method for
further use. Use
on the
button or
Save in the quantification dialog.
Fig. 5.12-3 Standard-based quantification with temporary reference