Buell S1 Lightning - Page 81

2-3
Rear axle nut 66-73 ft-lbs 89.5-98.9 Nm metric, page 2-6, page 2-13
Rear brake caliper banjo bolt 9.5-12.5 ft-lbs 12.9-17.0 Nm metric, page 2-26, page 2-27
Rear brake caliper
bleeder valve
6-9 ft-lbs 8.1-12.2 Nm metric, page 2-26, page 2-27
Rear brake caliper
mounting screw
18-22 ft-lbs 24.4-29.8 Nm metric, page 2-26
Rear brake lamp switch 7-8 ft-lbs 9.5-10.8 Nm LOCTITE SEALANT WITH TEFLON, page 2-27
Rear brake line clamp screw 10-12 ft-lbs 13.6-16.2 Nm page 2-27
Rear brake reservoir
mounting screw
12-15 in-lbs 1.4-1.7 Nm page 2-24
Rear brake rotor screw 35-40 ft-lbs 47.5-54.2 Nm
LOCTITE THREADLOCKER 242 (blue), metric,
page 2-12
Rear master cylinder banjo bolt 10-12 ft-lbs 13.6-16.2 Nm metric, page 2-24, page 2-27
Rear master cylinder
mounting screw
8-10 ft-lbs 10.8-13.6 Nm page 2-24
Rear master cylinder rod to
brake pedal screw
10-12 ft-lbs 13.6-16.2 Nm page 2-24
Rear shock mounting screw 40-45 ft-lbs 54.2-61.0 Nm metric, page 2-37
Sprocket bolt 55-65 ft-lbs 74.6-88.1 Nm LOCTITE THREADLOCKER 272 (red), page 2-12
Sprocket cover mounting screw 12-17 in-lbs 1.4-1.9 Nm page 2-53
Sprocket cover screw 4-6 ft-lbs 5.4-8.6 Nm page 2-53
Swingarm pinch screw 27-30 ft-lbs 36.6-40.7 Nm LOCTITE THREADLOCKER 242 (blue), page 2-34
Swingarm/drive support screw 20-25 ft-lbs 27.1-33.9 Nm page 2-53
Switchgear housing screws,
left side
25-33 in-lbs 2.8-3.7 Nm metric, page 2-45
Switchgear housing screws,
right side
12-17 in-lbs 1.4-1.9 Nm metric, page 2-43
Tie bar bolt 30-33 ft-lbs 40.7-44.7 Nm page 2-34
Valve stem nut 42-44 in-lbs 4.7-5.0 Nm page 2-16
ITEM TORQUE NOTES