Note
• For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper
Sizes.") ➔ P.496 (See "Types of Paper.") ➔ P.496
• To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver. (See "Specifying the
Ink Drying Time for Rolls.") ➔ P.522
• Once you have used all the paper on a roll, clean the platen. If the Platen inside the Top Cover becomes dirty, it may
soil the underside of paper. (See "Cleaning Inside the Top Cover.") ➔ P.907
1
Turn the printer on. (See "Turning the Printer On and
Off.")
➔P.21
2
Load the roll on the Roll Holder. (See "Attaching the Roll
Holder to Rolls.") ➔ P.507
iPF8400S
Loading and Printing on Rolls
User's Guide
Basic Printing Workflow Printing procedure
23
To Next Page
Loading...
