9
Access the Page Setup pane.
10
Select and click a roll paper in the APaper Source list.
11
Select the paper width of the roll loaded in the printer for BRoll Width. In this case, 16 in. (406.4mm) is selec-
ted.
12
Make sure the CPage Size setting matches the origi-
nal size as selected in CPaper Size in the Page At-
tributes dialog box—in this case, ISO A4.
13
Select the DEnlarged/Reduced Printing check box.
14
Click FFit Roll Paper Width.
15
Confirm the print settings, and then click MPrint to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.349
Resizing Originals by Entering a Scaling Value
Resizing Originals by Entering a Scaling Value
You can freely adjust the size of originals by enlarging or reducing them as desired.
•
Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
iPF8400S
Resizing Originals by Entering a Scaling Value
User's Guide
Enhanced Printing Options Printing enlargements or reductions
71
To Next Page
Loading...
