Canon imagePROGRAF iPF8400S User Manual

Messages regarding ink
Messages regarding ink
Ink insufficient. ....................................................................................................................................................................... 966
No ink left. ................................................................................................................................................................................ 966
Remaining level of the ink cannot be correctly detected. ................................................................................... 966
Close Ink Tank Cover ........................................................................................................................................................... 966
Ink tank is empty. .................................................................................................................................................................. 966
Not much ink is left. ............................................................................................................................................................. 967
No ink tank loaded. ............................................................................................................................................................... 967
The following ink tanks cannot be recognized. ........................................................................................................ 967
Ink insufficient.
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead, or do other
operations that require ink.
There is not enough ink of the color with × displayed above the remaining
ink indicator.
Press the OK button, open the Ink Tank Cover, and replace the Ink
Tank for the color that does not have enough ink.
(See "Replacing Ink Tanks.") ➔ P.872
No ink left.
No ink left.
Cause Corrective Action
There is no ink left.
There are no ink colors with × displayed above the re-
maining ink indicator.
Press the OK button, open the Ink Tank Cover, and replace the Ink Tank for the color
that is out of ink.
(See "Replacing Ink Tanks.") ➔ P.872
Remaining level of the ink cannot be correctly detected.
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if
you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection and take the
appropriate action. (See "Ink Level Detection.") ➔ P.949
Close Ink Tank Cover
Close Ink Tank Cover
Cause Corrective Action
The Ink Tank Cover is open. Close the Ink Tank Cover.
Ink tank is empty.
Ink tank is empty.
Cause Corrective Action
There is no ink left in an ink tank.
There are no ink colors with × displayed above the remaining ink indicator in
the Ink tab top screen.
(See "Checking Ink Tank Levels.") ➔ P.882
Open the Ink Tank Cover, and replace the Ink Tank for the color
that is out of ink.
(See "Replacing Ink Tanks.") ➔ P.872
Ink insufficient.
iPF8400S
User's Guide
Error Message Messages regarding ink
966

Canon imagePROGRAF iPF8400S Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Ink Type	Pigment-based
Number of Ink Colors	8
Maximum Media Width	44 inches
Operating Systems Supported	Windows, macOS
Print Technology	Inkjet
Connectivity	USB 2.0
Media Sizes	Roll Paper: 10"-44"
Media Types	Glossy photo paper, Matte photo paper, Proofing paper
Ink Cartridge Capacity	130 ml
Power Consumption	190W or less (printing)
Ink Cartridge Configuration	MBK, C, M, Y, PC, PM, GY