Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot execute this command. Use other paper. .................................................................................................. 968
Cannot adjust printhead. ................................................................................................................................................... 971
Cannot calibrate. ................................................................................................................................................................... 968
Excessive temperature or humidity. .............................................................................................................................. 968
Please execute common calibration. ............................................................................................................................ 969
Please commn calibrt using above paper. .................................................................................................................. 969
Please calibrate using above paper. ............................................................................................................................. 969
Borderless printng not possible. Paper stretched or shrank. ............................................................................ 969
Before borderless printing, move the blue platen switch. ................................................................................... 969
Borderless printng not possible. ..................................................................................................................................... 964
Blue platen switch is dirty. ................................................................................................................................................. 970
Move the blue platen switch No.xx to the right. (xx represents a number) ................................................. 970
Cannot adjust paper feed. ................................................................................................................................................ 970
Check printed document. .................................................................................................................................................. 970
Cannot execute this command. Use other paper.
Cannot execute this command. Use other paper.
Cause Corrective Action
Paper compatible
with color calibration
is not loaded.
1.
Press the OK button to clear the error.
2.
Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") âž” P.501
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be
completed correctly unless the loaded paper matches the settings.
Cannot calibrate.
Cannot calibrate.
Cause Corrective Action
The paper for printing a test pattern is soiled. Oth-
erwise, you have loaded colored paper.
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
See the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") âž” P.501
The test pattern was printed too faintly. Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.") âž” P.934
Direct sunlight or strong lighting may be shining
on the printer and causing the sensor to malfunc-
tion.
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or strong
lighting.
Excessive temperature or humidity.
Excessive temperature or humidity.
Cause Corrective Action
The temperature or humidity
where the printer is installed is
out of the acceptable range for
operation.
Press â–² or â–¼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental conditions are
recommended for various types of paper. For details on the recommended environmental conditions, see
the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") âž” P.501
Cannot execute this command. Use other paper.
iPF8400S
User's Guide
Error Message Messages regarding printing or adjustment
968