Cutter Unit
Cutter Unit
Cutter Unit ............................................................................................................................................................................... 894
Replacing the Cutter Unit .................................................................................................................................................. 894
Cutter Unit
Cutter Unit
When purchasing, check the Model number.
Shape Model number
CT-06
Note
• For instructions on Cutter Unit replacement, see "Replacing the Cutter Unit." ➔ P.894
Replacing the Cutter Unit
Replacing the Cutter Unit
Compatible Cutter Units
For information on compatible cutter units, see "Cutter Unit."
➔P.894
Access the menu for cutter unit replacement
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Change Cutter, and then press the OK button.
The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.
Note
• If you do not respond within two minutes, cutter cleaner replacement is canceled. In this case, repeat the procedure.
Cutter Unit
iPF8400S
User's Guide
Maintenance and Consumables Cutter Unit
894
To Next Page
Loading...
