Mac OS
1
Choose Print in the application menu.
2
Select the Main pane and click C Settings in A Media Type.
3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in C Between
Pages and D Between Scans in B Drying Time, and
then click OK.
(See "Paper Detailed Settings Dialog Box (Mac
OS).") âž” P.354
Specifying the Cutting Method for Rolls
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit following
printer driver settings.
Media
Menu > Pa-
per Details
> (Various
Types of
Paper) >
Cutting
Mode
Automatic Auto Cut
(See "Cut-
ting Roll Pa-
per After
Print-
ing.")
âž” P.155
Yes
Eject (when
the paper
surface is
being
scratched /
to wait for
ink to dry)
Select this to move the cutter by key operation and cut
paper. Although there are cases with Automatic in
which the paper falls and the paper surface is scratched
when the paper rubs the Output Stacker, you can avoid
damaging the paper with this method since you can cut
by holding the paper with your hand so that the paper
does not fall when cutting, Also, since you can cut while
visually confirming the drying of the ink, you can avoid
ejecting paper before the ink has dried.
Eject Yes
iPF8400S
Specifying the Cutting Method for Rolls
User's Guide
Handling and Use of Paper Handling rolls
523
To Next Page
Loading...
Need help?
General
