The color chart is printed and color measurement begins.
Note
• You can exit the acquire color measurement data operation in the middle by clicking the Cancel button. However, it
may take some time to end.
11
Click the OK button.
Once the color measurement has finished, the color meas-
urement data is saved on the computer.
Executing Color Check
Executing Color Check
When a color check is executed, a built-in pattern is printed, the color difference from a calibration target registered in
the printer is calculated, and the check results are displayed.
Note
• This step can be executed when a printer that has a spectrophotometer unit installed is selected.
• When printing the color check adjustment pattern, the calibration adjustment values are applied even if Use Adj. Value is set
to Disabled in the Control Panel menu.
Setting the Color Check Threshold Value
1
Double-click the printer you want to execute the color check
on in the Printer list.
Executing Color Check
iPF8400S
User's Guide
Color Management Color Calibration Management Console (Windows)
828
To Next Page
Loading...
