• G Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
• H Borderless Printing
Borderless printing is available if roll paper is selected in the A Paper Source list.
Activate this setting for borderless printing to match the size and width of the paper.
•
Borderless Printing by Resizing Originals to Fit the Roll Width ➔ P.92
•
Borderless Printing at Actual Size ➔ P.81
• J Print Centered
Select this checkbox to print document images in the center of the paper.
•
Printing Originals Centered on Rolls ➔ P.128
•
Printing Originals Centered on Sheets ➔ P.133
• K No Spaces at Top or Bottom
Select this checkbox to print the next image skipping blank areas above and below printable data in documents,
which enables you to conserve the paper.
•
Conserving Roll Paper by Printing Originals Without Top and Bottom Margins ➔ P.141
• L Rotate Page 90 degrees
Select this checkbox to rotate the document image by 90 degrees before printing.
•
Conserving Roll Paper by Rotating Originals 90 Degrees ➔ P.138
• N Free Layout
Select this checkbox to start imagePROGRAF Free Layout before printing.
This allows you to print multiple documents next to each other.
Important
• When Print Preview is selected on the Main panel, Print Preview is disabled.
•
Printing Multiple Originals Next to Each Other ➔ P.112
Additional Settings Pane
Additional Settings Pane
The following settings are available on the Additional Settings pane.
• A
Send job to
You can configure the method for saving print jobs to the printer hard disk.
Additional Settings Pane
iPF8400S
User's Guide
Mac OS Software Printer Driver
364
To Next Page
Loading...
