Handling rolls
Handling rolls
Attaching the Roll Holder to Rolls .................................................................................................................................. 507
Loading Rolls in the Printer ............................................................................................................................................... 510
Changing the Type of Paper ............................................................................................................................................ 514
Specifying the Paper Length ............................................................................................................................................ 516
Removing the Roll from the Printer .............................................................................................................................. 517
Removing the Roll Holder from Rolls ........................................................................................................................... 519
➔ Clearing Jammed Roll Paper ..................................................................................................................................... 922
Feeding Roll Paper Manually ............................................................................................................................................ 521
Keeping Track of the Amount of Roll Paper Left ................................................................................................... 521
Specifying the Ink Drying Time for Rolls .................................................................................................................... 522
Specifying the Cutting Method for Rolls .................................................................................................................... 523
Cutting the Leading Edge of Roll Paper Automatically ........................................................................................ 530
Reducing Dust from Cutting Rolls ................................................................................................................................. 532
Roll Holder Set ........................................................................................................................................................................ 671
Attaching the Roll Holder to Rolls
Attaching the Roll Holder to Rolls
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped
with the 2-Inch Paper Core Attachment installed.
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Roll Holder Side Holder Stopper Side Roll Holder Side Holder Stopper Side
No Attachment Needed 2-Inch Paper Core Attachment 3-Inch Paper Core Attachment #1 3-Inch Paper Core Attachment #2
Caution
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause injury.
iPF8400S
Attaching the Roll Holder to Rolls
User's Guide
Handling and Use of Paper Handling rolls
507
To Next Page
Loading...
