13
Press the ▼ button to make the roll a little slack.
14
On the Right Media Take-up Unit, pull the Rewind
Mode Switch forward to turn it on. Press the ▼ button
to rewind the roll so that it is nearly taut.
Important
• Rewind the paper so that the paper core makes at least two revolutions. If the paper is not rewound two full revolu-
tions, repeat steps 13 and 14.
• Do not manually force the Rewind Spool or paper core to rotate them. This may damage them. To rewind or un-
wind rolls, press ▲ or ▼ on the Media Take-up Unit.
Loading the Rewind Spool on the Media Take-up Unit
iPF8400S
User's Guide
Handling and Use of Paper Media take-up unit
554
To Next Page
Loading...
