Canon imagePROGRAF iPF8400S User Manual

5 Press ▲ or ▼ to select Yes. As you hold the trailing edge of the printed document, press the OK button.
The roll is now cut.
Important
• Always hold the trailing edge of printed documents when cutting rolls. If you do not hold the documents, they may
fall on the floor and the printed surface may become soiled.
6
Hold the trailing edge of the printed document and
press the ▼ button on the Media Take-up Unit to re-
wind the printed document.
Apply adhesive tape to the rewound paper to hold it in
place, if necessary.
Important
• Be careful not to scratch the printed surface.
7
Turn off the Media Take-up Unit by pushing in the Re-
wind Mode Switch.
Removing Printed Documents from the Media Take-up Unit (Optional) iPF8400S
User's Guide
Handling and Use of Paper Media take-up unit
558

Canon imagePROGRAF iPF8400S Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Ink Type	Pigment-based
Number of Ink Colors	8
Maximum Media Width	44 inches
Operating Systems Supported	Windows, macOS
Print Technology	Inkjet
Connectivity	USB 2.0
Media Sizes	Roll Paper: 10"-44"
Media Types	Glossy photo paper, Matte photo paper, Proofing paper
Ink Cartridge Capacity	130 ml
Power Consumption	190W or less (printing)
Ink Cartridge Configuration	MBK, C, M, Y, PC, PM, GY