Canon imagePROGRAF iPF8400S User Manual

2 Select Administrator Mode and click Logon.
3
If a password has been set on the printer, enter the password.
4 Click Network in the Device Manager menu at left to display the Network page.
5 Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol Settings
page.
6 Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Item Details
Default Set-
ting
Frame Type Specify the type of frame to use in NetWare. Disabled
NCP Burst Mode Activate this setting to use NCP Burst Mode.
This mode supports fast data transfer when printing in queue server mode.
Normally, leave the setting On.
On
Print Application Choose the print service.
The print service selected here is enabled. Multiple print services cannot be
enabled simultaneously.
• Bindery PServer
• RPrinter
• NDS PServer
• NPrinter
NDS PSer-
ver
Packet Signature Select If Requested by Server to use packet signature. If Reques-
ted by
Server
Bindery PServer File Server Name Specify the name of a file server that has a NetWare print server.
(0–47 characters)
—
Print Server Name Specify the name of a NetWare print server.
(0–47 characters)
—
Print Server Pass-
word
Set a password for the print server.
(0–20 characters)
—
Polling Interval Specify the interval to confirm jobs.
(1–15 seconds)
5
RPrinter Print Server Name Specify the name of a NetWare print server.
(0–47 characters)
—
Printer Number Specify the number of the printer connected to the NetWare print server.
(0-15)
0
NDS PServer Tree Name Specify the name of an NDS tree that has a NetWare print server.
(0–32 characters)
—
Context Name Specify the name of a context that has a NetWare print server.
(0–255 characters)
—
Print Server Name Specify the name of a NetWare print server.
(0–64 characters)
—
Print Server Pass-
word
Set a password for the print server.
(0–20 characters)
—
Polling Interval Specify the interval to confirm jobs.
(1–255 seconds)
5
NPrinter Print Server Name Specify the name of a NetWare print server. —
Configuring the Printer's NetWare Network Settings With RemoteUI iPF8400S
User's Guide
Network Setting NetWare Settings
692

Canon imagePROGRAF iPF8400S Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Ink Type	Pigment-based
Number of Ink Colors	8
Maximum Media Width	44 inches
Operating Systems Supported	Windows, macOS
Print Technology	Inkjet
Connectivity	USB 2.0
Media Sizes	Roll Paper: 10"-44"
Media Types	Glossy photo paper, Matte photo paper, Proofing paper
Ink Cartridge Capacity	130 ml
Power Consumption	190W or less (printing)
Ink Cartridge Configuration	MBK, C, M, Y, PC, PM, GY