Canon imagePROGRAF iPF8400S User Manual

3 Click the Add button. To change the unit cost of a media type that has already been configured, click the Over-
write button.
4 Click the OK button.
Important
• The settings are not applied until you click the OK button.
Specifying Price by Roll Paper
1 Select the media type in Media Type.
2
Click the Roll Paper Width Settings button to display the Roll
Paper Width Settings dialog box.
3 Enter the Roll Paper Width and Length of the paper, as well as the Price for the configured length.
4 Click the Add button to return to the Paper sheet.
5 To change the unit cost of a media type that has already been configured, click the Overwrite button.
6 Click the OK button.
Important
• If you do not set the standard prices, you cannot set the price for each roll paper.
• If the Roll Paper Width is set to the same value as the Width of the paper configured in the standard prices, the cost is
calculated using the price configured in the Roll Paper Width Settings dialog box.
• The settings are not applied until you click the OK button.
Setting the Unit Cost for Paper iPF8400S
User's Guide
Print Job Management Accounting (Windows)
718

Canon imagePROGRAF iPF8400S Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Ink Type	Pigment-based
Number of Ink Colors	8
Maximum Media Width	44 inches
Operating Systems Supported	Windows, macOS
Print Technology	Inkjet
Connectivity	USB 2.0
Media Sizes	Roll Paper: 10"-44"
Media Types	Glossy photo paper, Matte photo paper, Proofing paper
Ink Cartridge Capacity	130 ml
Power Consumption	190W or less (printing)
Ink Cartridge Configuration	MBK, C, M, Y, PC, PM, GY