2
Load the paper.
(See "Attaching the Roll Holder to Rolls.") ➔ P.507
(See "Loading Rolls in the Printer.") ➔ P.510
(See "Loading Sheets in the Printer.") ➔ P.533
Note
• If Adj. Quality has not been executed even once on the paper you are using when you execute Auto Adjust (High
Precision), execute Adj. Quality in the control panel menu.
(See "Automatic Banding Adjustment.") ➔ P.775
3
If a spectrophotometer unit is mounted, select the White/Black Backing Plate color.
We recommend white.
Note
• For the color of the White/Black Backing Plate, continue using the selected color without changing each time you
execute color calibration.
Executing Color Calibration
1
Open the Calibration sheet.
2
Select the printer you want to execute color calibration on
from the Printer list.
iPF8400S
Executing Color Calibration
User's Guide
Color Management Color Calibration Management Console (Windows)
819
To Next Page
Loading...
